The inspection-type UAV drive-away device is mainly used to enforce the control of UAVs or flying vehicles in flight, and to cut off the connection between the UAV and the remote controller a...
0755-2710 9037 Product Center
Contact us
Shenzhen Yue'an Emergency Management Co., Ltd.
0755-2710 9037 
18138856898 
wangxy1163@163.com 
Room 5-04, Carianina Plaza, No. 2002 Renmin South Road, Luohu Community, Nanhu Street, Luohu District, Shenzhen City Inquire now
Product description
The inspection-type UAV drive-away device is mainly used to enforce the control of UAVs or flying vehicles in flight, and to cut off the connection between the UAV and the remote controller at a long distance. The UAV can be controlled by this interceptor. Forced landing or forced flight formation to ensure the safety of low-altitude airspace in the area. Cutting off all signal connections between the drone and the weak controller, the drone ground controller cannot receive aerial videos and pictures, and the drone cannot locate, causing the drone to crash, make an emergency stop, or retreat.
Features
1. Adopt ultra-high frequency broadband seamless interference technology.
2. Single-channel switch technology controls power output.
3. The effective power (channel power) is high and the interference distance is long.
4. Effective segmentation, only interferes with drone control and video transmission frequency, and will not affect other
frequencies causing interference.
5. Built-in battery (plug-in design, removable battery), with a continuous battery life of 30 minutes
clock or more.
6. Two external high-power fans provide better heat dissipation.
7. Imported devices and slow start circuit design can avoid sparking caused by mechanical switches.
Image, high integration and stable operation.
Product parameters
| product name | Portable drone control equipment |
| Product number | DKSW-003 |
| Host size | Length 78cm, width 26cm, thickness 7cm |
| Detector size | Physical parameters: 250x55X73mm (excluding bracket), 470g (including bracket) |
| powered by | The battery is removable. Equipped with two sets of lithium batteries: 27V/5000mAh and 27V/8000mAh for continuous operation |
| 4 to 5 hours with external charger. | |
| Detection band | 2.4GHz &5.8GHz dual frequency band |
| Response time | 3s response to alarm@standby; |
| 6s to respond to alarm@shutdown→power on | |
| Alarm mode | Sound alarm, dynamic warning graphics and text flashing |
| Detector display | 1.8-inch LED high-definition color screen |
| interface | Micro USB charging port |
| Operating mode | Detection mode (simple), debugging mode (professional), measurement spectrum mode |
| Working power supply | Built-in 5000mAh large-capacity lithium battery. Working time >8 hours, direct power supply for continuous operation |
| Operation method | One-hand or two-hand operation, three frequency bands can be turned on at will |
| Heat dissipation method | air cooling |
| Interception method | Forced return, forced landing, hovering, image transmission interference |
| intercept channel | Three channels |
| Support frequency band | Satellite navigation: 1560-1620MHz one channel; remote control and digital transmission: 2400MHz-2500MHz two channels; |
| Remote control and digital transmission: 5725-5850MHz. (When 900M/1.2G/ is selected, 2.4G/5.8G is reduced to | |
| Each way) | |
| RF power | GPS-1.5G: 20W, two channels of 2.4G: a total of 33W, two channels of 5.8G: a total of 36W |
| antenna | built-in |
| regulatory distance | Open land ≥1500 meters |
| weight | About 6.5Kg (excluding charger) |
